MAX202EWE |
|
|
MAX200-MAX213.pdf |
The MAX200-MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication interfaces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V needed for RS-232 output levels. The MAX201 and MAX209 operate |
|
MAX207CAG |
ARTSCHIP |
|
MAX200-MAX213.pdf |
The MAX200-MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication interfaces where ±12V supplies are not available. On-board charge pumps convert the +5V input to the ±10V needed for RS-232 output levels. The MAX201 and MAX209 operate |
|
MAX485ESA |
MAX |
|
MAX485CPA.pdf |
The MAX481, MAX483, MAX485, MAX487-MAX491, and MAX1487 are low-power transceivers for RS-485 and RS- 422 communication. Each part contains one driver and one receiver. The MAX483, MAX487, MAX488, and MAX489 feature reduced slew-rate drivers that minimize |
|
HT6221 |
ARTSCHIP |
- |
HT6221.pdf |
The HT6221/HT6222 are CMOS LSI encoders designed for use in remote control systems. They are capable of encoding 16-bit address codes and 8-bits data codes. Each address/data input can be set to one of the two logic states, 0 and 1. The HT6221/HT6222 |
|
HT6222 |
ARTSCHIP |
SOP,DIP |
HT6221.pdf |
The HT6221/HT6222 are CMOS LSI encoders designed for use in remote control systems. They are capable of encoding 16-bit address codes and 8-bits data codes. Each address/data input can be set to one of the two logic states, 0 and 1. The HT6221/HT6222 |
|
HT1621 |
ARTSCHIP |
|
ht1621.pdf |
The HT1621 is a 128 pattern (32x4), memory mapping, and multi-function LCD driver. The S/W configuration feature of the HT1621 makes it suitable for multiple LCD applications including LCD modules and display subsystems. Only three or four lines are requ |
|
|
|